Mark-levinson Reference Preamplifier N32 Manuel d'utilisateur télécharger pdf (Page 16)

this , not

Warning: The cables must lie flat against phono preamp top

cover to slide in to Nº32 preamp.

8. Gently slide the left phono preamp module into the open-

ing in the left channel of the Nº32 preamp. Repeat for right

channel.

Do not force! The phono preamp modules should slide in easily.

If a phono preamp module does not slide in easily, remove it and

repeat step 7.

9. Reinstall the four screws that were removed from phono

option cover plate (

⁄64” hex key)

Please take care to avoid cross-threading these relatively small

screws.

10. Install two 10-32 socket head cap screws into floor of Nº32

Preamplifier, through the mounting tabs in the phono

preamp modules. (

⁄32” hex key)

These are the relatively heavy-duty screws that were supplied with

your Nº32 phono modules. The floor of the Nº32 has threaded

inserts waiting to accept these screws.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Pas de commentaire

Mark-levinson Reference Preamplifier N32 Manuel d'utilisateur Page 16