Mark Levinson 433 Manuel du propriétaire télécharger pdf (Page 30)

Mark Levinson

Specifications

The correlation between published specifications and performance is unreliable.

Measurements of your amplifier yield excellent results by any standards. However,

only those specifications that apply to its actual operation are included here. Specifi-

cations are subject to change without notice.

Rated power output:

• 200 w/ch rms power @ 8Ω

• 400 w/ch rms power @ 4Ω

All above power ratings from 20 Hz–20 kHz at <0.5% THD

(assuming that the AC mains can deliver adequate current, without

its own voltage sagging)

Frequency response:

• within 0.2 dB from 20 Hz to 20 kHz

Signal to Noise ratio:

• better than –80 dB (ref. 2.83V)

Input impedance:

•100kΩ (balanced)

•50kΩ (unbalanced)

Voltage gain:

•26.8 dB

Input sensitivity:

• 2.83V output: 130 mV

• Full output: 1.82V

Power consumption:

•200W in on, 100W in standby, 10W in sleep

Mains voltage:

• determined by the needs of country for which the unit was

manufactured; cannot be reset by dealer or user

Overall dimensions:

See “Dimensions” on page 32.

Shipping weight:

• 130.5 lbs. (59.2 kg)

Net weight:

• 114.5 lbs. (51.9 kg)

Connector

complement:

• six custom binding posts

• three 3-pin XLR balanced input connectors

• three RCA input connectors

• two 1/8-inch mini-jacks for remote turn-on

• one RS-232 port on RJ-11

• two Mark Levinson communications ports on RJ-11, RJ-45

• one IEC-standard AC receptacle

Output impedance:

• less than 0.05Ω from 20–20,000 Hz

1 2 ... 25 26 27 28 29 30 31 32 33 34

Commentaires sur ces manuels

Pas de commentaire

Mark Levinson 433 Manuel du propriétaire Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio Mark Levinson 433